£0.00View All
(0) Shopping Cart
Currency
Manufactures
delivery

On Orders Over £250.00

Burlington Anglesey Angled Wall Mounted/S Adjuster Bath Shower Mixer - AN21

« back
Home > Manufacturers > Burlington > Burlington Anglesey
Burlington Anglesey Angled Wall Mounted/S Adjuster Bath Shower Mixer - AN21
Product Brand: Burlington
Product Code: AN21
Product MPN: AN21
Burlington Anglesey Angled Wall Mounted/S Adjuster Bath Shower Mixer - AN21

Tap comes with the traditional screw down valves as standard
Traditional styling bath shower mixer tap
Angled bath shower mixer including the standard cradle, s adjuster, diverter handle, hose, ceramic telephone handset
Indices are made from ceramic
Tap height is 453mm
Centre of inlet to centre of outlet is 130mm
Inlet centres 180mm
Shower hose length 1500mm
Shower hose internal diameter is Ø14mm
G 3/4" inlet connections
Suitable for low and high pressure system
For specific flow rates - See additional images
10 years guarantee from Burlington on this bath shower mixer
Tap is made from brass ingots and chrome plated to 0.3-0.4 micron
Available in Angled version - you can now see the taps heads at the correct angle when you walk into your bathroom
Tap supplied with a Neoperl flow straightener (for low water pressure) and a Neoperl aerator (for high water pressure) and a Neoperl key to swap the two items out

Benefits of Neoperl; Aerators limit the flow of water to a fixed rate, so you have optimal performance from your tap, without wasting any water
Aerators create the 'champagne' effect in the flow of the water
Flow straighteners make the flow of the water cleaner, so there is less splashing

Compliance / Approvals:
BS 5412:1996 - Specification for low-resistance single taps and combination tap assemblies (nominal size 1 and 3) suitable for operation at PN 10 max. and a minimum flow pressure of 0.01 MPa (0.1 bar)
BS EN 200:2008 - Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification
Note: Bath shower mixer (BSM) comes with a 'S adjuster'. This additional piece is inserted into a bsm via two allen key fixings (allen key is supplied) . It has double recessed 'O' rings internally on both sides - this means that the 'S adjuster' can be installed at a fixed angle or in a semi-rigid manner. The 'S adjuster' is designed so that the last drips after using the telephone handset drip into the bath - not onto the tap ledge (this reduces cleaning, and reduces mould and potential water ingress at the perimeter of the bath)
Installation details provided, please Download PDF from the technical diagram

RRP: £484.00
NOW: £411.40